WaveWarp 2.0 Component
      
Signal Generators:
Constant Control Generator
|
Functional Description
Generates a
constant control signal with selectable amplitude over the range from 0 to
10000.
NOTE: the sample rate at which this component is executed can be arbitrarily set via the
"Sample-rate setting for Signal Generators and
Input ASCII files" button
(or the "Sample-Rate Setting" command under the "Edit" menu) on the toolbar, which is
activated whenever the component is selected on the DrawingBoard.
Equivalently, it can be set via the dialog box which (i) appears
when the component is initially
dragged on to the DrawingBoard or (ii) is activated using the right-mouse-button when
the component is selected on the DrawingBoard.
This procedure allows the component to either (i) enforce
a user-determined sample rate on the downstream component(s), or (ii) to inherit the sample rate from
the downstream component(s). Different signal generators can run at different
sample rates on a DrawingBoard, as long as the rules of connectivity
for multiple sample rates are adhered to (see the
WaveWarp Users' Guide
for more information.)
The constant amplitude is selected via the Parameter Window, as summarised in the following table.
| Parameter | Purpose |
|---|
| "Value" slider |
Sets the value of the constant control signal, given by the slider value multiplied
by the "Max value" range selection. The resultant value is displayed in the
"Total value" indicator box.
|
Algorithm
n/a
Signal Implementations
| Audio signals | Control signals | Description |
|---|
| n/a | single output | Generates a control signal with an amplitude between 0 and 10000 |
Related components:
Example DrawingBoards illustrating usage:
|
