Sounds Logical
home

WaveWarp 2.0 Component

IndexCurrent GroupPrevious GroupNext GroupPrevious ComponentNext ComponentBottom of Page

Functional Description | Algorithm | Signal Implementations | Related Components | Example DWBs usage

Switches:

Controllable Switch 8 Inputs

Functional Description
 Routes the selected input audio signal to the output, nominally muting all other audio inputs. The signal selection is dynamically performed via the control input (its floating-point value rounded up to the nearest integer value, with out-of-bounds protection). The instantaneous selection is displayed in the "Active input" readout in the Parameter Window. The "Output gain" slider adjusts the output level, and the "Leakiness" slider enables the switching to be suppressed to any desired degree, thereby allowing all the non-selected input(s) to "leak" into the output. Stereo signals have separate adjustments for left and right channels.
Algorithm
 IMPORTANT: This switch is not a "true" switch in the sense that it only mutes the un-selected signal ports rather than de-activate all components on those sub-branches connected to the un-selected ports. Hence all components on all sub-branches are continuously executed in real-time -- albeit, some with muted signals -- so caution should be exercised when using such switches in order that the CPU is not exhausted by excessive numbers of components.
Signal Implementations
Audio signals Control signals Description
8 inputs single output mono-mono single input The selected mono audio input is sent to the mono audio output. The control input determines the selection.
8 inputs single output mono-stereo single input The selected mono audio input is sent to the stereo audio output with individual left and right gains. The control input determines the selection.
8 inputs single output stereo-mono single input The selected stereo audio input is sent to the mono audio output after applying individual left and right gains, followed by averaging. The control input determines the selection.
8 inputs single output stereo-stereo single input The selected stereo audio input is sent to the stereo audio output after applying individual left and right gains. The control input determines the selection.
Related components:
Example DrawingBoards illustrating usage:
  • None

IndexCurrent GroupPrevious GroupNext GroupPrevious ComponentNext ComponentTop of Page
home - news - products - store - support - site map - company info
© 2007 Sounds Logical. All rights reserved.
Sounds Logical
legal notice - privacy statement