Live input multichannel panner built from scratch
Illustrates WaveWarp's multichannel I/O and live input functionality. Connect an audio source such as an electric guitar or
microphone (or any other instrument!) into the first input of your soundcard(s) and hit "Play". In this example, two stereo
soundcards (or a multichannel soundcard) are used to create a four-channel panning effect. The Up-Down Ramp Control
Generators are used to generate ramp signals for modulating the output amplitudes of each channel. The relative phases
of the ramp signals are adjusted such that the output signal appears to "travel around" the four speakers, one after the
other. This is just one example of a panning profile.
The structure can easily be extended to generate more outputs (i.e. for more than two soundcards), and any arbitrary
panning profile may be applied (constructed from a combination of basic building blocks).
