4-band (octave) distortion implemented using polyphase IIR all-pass second-order up and down samplers.
Each octave frequency band has a different distortion process (created from Wave Shaper). This is a good example of
multi-rate signal processing whereby high computational efficiency can be achieved by successively downsampling the
signal such that the processing in each "band" is running at a successively lower sample rate. In this example, each band
is an octave lower than the previous (due to the factor of 2 downsampling). The downsamplers are implemented using
2-channel recursive filter banks (consisting of complementary hi - lo allpass filters implemented in polyphase form). This is
the most efficient method of implementing the filter banks. (However, since these IIR filters do not exhibit linear-phase
characteristics they may be unacceptable in some applications.) This DrawingBoard clearly illustrates the powerful multi-rate
functionality of WaveWarp, a key feature of the software. Try out different effects in the various frequency bands !
