WaveWarp 2.0 Component
      
Signal Generators:
Periodic Uniform Noise Generator
|
Functional Description
Generates an audio signal
based on a repeating
(pseudo-)random uniform noise sequence.
For efficiency, the waveform is pre-calculated and
stored in a wavetable (buffer).
NOTE: the sample rate at which this component is executed can be arbitrarily set via the
"Sample-rate setting for Signal Generators and
Input ASCII files" button
(or the "Sample-Rate Setting" command under the "Edit" menu) on the toolbar, which is
activated whenever the component is selected on the DrawingBoard.
Equivalently, it can be set via the dialog box which (i) appears
when the component is initially
dragged on to the DrawingBoard or (ii) is activated using the right-mouse-button when
the component is selected on the DrawingBoard.
This procedure allows the component to either (i) enforce
a user-determined sample rate on the downstream component(s), or (ii) to inherit the sample rate from
the downstream component(s). Different signal generators can run at different
sample rates on a DrawingBoard, as long as the rules of connectivity
for multiple sample rates are adhered to (see the
WaveWarp Users' Guide
for more information.)
The characteristics of the waveform are adjustable via
the Parameter Window, as summarised in the
following table.
| Parameter | Purpose |
|---|
| "Frequency" slider |
Adjusts the frequency (bandwidth) of the output signal. When the wavetable is played,
it is scanned at the appropriate rate (dependent
on the wavetable length) to generate the desired frequency.
|
| "Amplitude" slider |
Adjusts the amplitude of the output signal.
|
| "Length" slider |
Adjusts the length of the wavetable.
|
| Plot window |
Displays a representative portion of the output noise sequence.
|
Algorithm
Utilizes a pseudo-random number generator using the system clock as
a "seed".
The waveform is stored
in a wavetable, and is scanned using a table-lookup oscillator algorithm
(see
[Moore]
section 3.1.7
and
[Roa] p. 90-95
for further information).
Signal Implementations
| Audio signals | Control signals | Description |
|---|
| Single output mono | n/a | Generates a mono signal, sent to the mono output |
| Single output stereo | n/a | Generates a mono signal,
sent (in duplicate) to the stereo output channels |
Related components:
Example DrawingBoards illustrating usage:
|
