WaveWarp Component Library-- Switches-- Switch 3 Outputs

Search Tips

WaveWarp 2.0 Component

Functional Description | Algorithm | Signal Implementations | Related Components | Example DWBs usage

Switches:

Switch 3 Outputs

Functional Description

Routes the audio input to the selected audio output, nominally muting all other outputs. The signal selection is performed using the "Output" buttons in the Parameter Window. The "Output gain" slider adjusts the output level, and the "Activate all" checkbox enables the switching to be overridden by sending the input to all outputs simultaneously. Stereo signals have separate adjustments for left and right channels.

Algorithm

IMPORTANT: This switch is not a "true" switch in the sense that it only mutes the un-selected signal ports rather than de-activate all components on those sub-branches connected to the un-selected ports. Hence all components on all sub-branches are continuously executed in real-time -- albeit, some with muted signals -- so caution should be exercised when using such switches in order that the CPU is not exhausted by excessive numbers of components.

Signal Implementations

Audio signals	Control signals	Description
Single input 3 outputs mono-mono	n/a	The mono audio input is sent to the manually-selected mono audio output.
Single input 3 outputs mono-stereo	n/a	The mono audio input is sent to the manually-selected stereo audio output with individual left and right gains.
Single input 3 outputs stereo-mono	n/a	The stereo audio input is sent to the manually-selected mono audio output after applying individual left and right gains, followed by averaging.
Single input 3 outputs stereo-stereo	n/a	The stereo audio input is sent to the manually-selected stereo audio output after applying individual left and right gains.

Related components:

Example DrawingBoards illustrating usage:

None

home - news - products - store - support - site map - company info

legal notice - privacy statement