WaveWarp Component Library-- Switches-- Switch 7 Inputs

Search Tips

WaveWarp 2.0 Component

Functional Description | Algorithm | Signal Implementations | Related Components | Example DWBs usage

Switches:

Switch 7 Inputs

Functional Description

Routes the selected input audio signal to the output, nominally muting all other audio inputs. The signal selection is performed using the "Input" buttons in the Parameter Window. The "Output gain" slider adjusts the output level, and the "Leakiness" slider enables the switching to be suppressed to any desired degree, thereby allowing all the non-selected input(s) to "leak" into the output. Stereo signals have separate adjustments for left and right channels.

Algorithm

IMPORTANT: This switch is not a "true" switch in the sense that it only mutes the un-selected signal ports rather than de-activate all components on those sub-branches connected to the un-selected ports. Hence all components on all sub-branches are continuously executed in real-time -- albeit, some with muted signals -- so caution should be exercised when using such switches in order that the CPU is not exhausted by excessive numbers of components.

Signal Implementations

Audio signals	Control signals	Description
7 inputs single output mono-mono	n/a	The manually-selected mono audio input is sent to the mono audio output.
7 inputs single output mono-stereo	n/a	The manually-selected mono audio input is sent to the stereo audio output with individual left and right gains.
7 inputs single output stereo-mono	n/a	The manually-selected stereo audio input is sent to the mono audio output after applying individual left and right gains, followed by averaging.
7 inputs single output stereo-stereo	n/a	The manually-selected stereo audio input is sent to the stereo audio output after applying individual left and right gains.

Related components:

Example DrawingBoards illustrating usage:

None

home - news - products - store - support - site map - company info

legal notice - privacy statement