Sounds Logical
home

WaveWarp Users' Guide: last updated 28 February 2002

Table Of ContentsPrevious PageNext Page

2.18-- Displaying component information

Useful information about each component (e.g. mono/stereo signal implementation, etc) can be displayed by pressing the "Display component info on all DrawingBoards" button on the toolbar as shown in Figure 11 (The same thing can be achieved by selecting "Display Component Info" in the Options menu).

Figure 11 Annotated screenshot of the "Sample Rate" and "Component Info" display buttons

For example, Figure 1 shows the "Welcome.dwb" DrawingBoard with "Display component info on all DrawingBoards" activated. This is the default state when WaveWarp is installed.

Table Of ContentsPrevious PageNext PageTop Of Page
home - news - products - store - support - site map - company info
© 2007 Sounds Logical. All rights reserved.
Sounds Logical
legal notice - privacy statement